Filtration systems for drinking water on board

Installation of water filters and purification systems for yachts in Mallorca

We installed filtration systems and customized solutions to improve the quality of drinking water in the kitchen and key areas of the yacht, with options such as UV filters, activated carbon, microns and Quooker-type systems.

Onboard technical installation Customized solutions Quooker and premium systems

Installation of filtration systems

Drinking water solutions designed for yachts

We install filtration systems in areas of actual use on the yacht, especially in the kitchen, sink, and other points where water is used daily. The solution is determined by the available space, the existing installation, and the desired level of comfort on board.

What type of solutions do we install?

Each vessel requires a different approach. Depending on the case, we can work with systems designed to improve flavor, reduce particles, strengthen bacterial control, or integrate a more practical solution for the kitchen and points of consumption.

  • Micron filters for particles and impurities
  • Activated carbon filters to improve taste and smell
  • Ultraviolet systems as support in bacterial control
  • Quooker-type systems for cold, boiling, or sparkling water

Actual scope of this service

This page is focused on the Installation and integration of filtration systems for points of consumption. The goal is to improve the onboard water experience with a technical solution well-suited to the yacht.

What we do Installation, hydraulic adaptation, technical integration and recommendation of solutions according to use, space and type of vessel.
What we do not offer as our own service Sanitary certification of the system, certified cleaning of tanks or specialized maintenance of desalination plants.
When the project requires it We can coordinate the hydraulics with other specialists for broader integrations within the yacht's water system.
Installation of Purifiers

What filtration and purification systems do we install?

We don't just supply equipment. We study the point of consumption, the available space, and the existing configuration of the yacht to install a functional, clean, and well-integrated solution.

Installation of filters at points of consumption

We install filtration systems in the yacht's kitchen, sinks, preparation areas and other specific points where it is necessary to improve the quality of water intended for consumption or daily use on board.

Integration of UV systems, activated carbon and micron filtration

We adapt different technologies according to the technical objective of the installation, whether it is to reduce impurities, improve the smell and taste of the water or reinforce the hygiene of the system at specific points of consumption.

Replacement and improvement of existing facilities

When the onboard system no longer responds well, has limitations, or has become outdated, we replace components, reorganize lines, and improve the existing assembly.

A well-planned installation avoids improvisations on board

In this type of work, both the equipment chosen and the installation method are important. Therefore, we assess accessibility, future maintenance, compatibility with the existing network, and the vessel's actual usage before undertaking any work.

  • Adaptation to the available technical space
  • Clean and tidy assembly
  • Compatibility with existing system
  • Practical system for maintenance and future replacements
Common problems on board

What problems do we solve with the yacht's drinking water?

Often the need doesn't begin with a technical search, but with a daily discomfort: water that isn't inviting to drink, an impractical kitchen, or an installation that no longer fits the actual use of the yacht.

That's why, before recommending a system, we assess the point of consumption, the existing installation, and the client's objective: to improve flavor, gain convenience, reduce bottles, or integrate a more premium solution into the kitchen.

The key is choosing the right solution. Not all boats need the same type of filtration, nor do all upgrades need to be installed at the same point in the system.
01

Water with an unpleasant taste or smell

When water isn't convenient to drink or use in the kitchen, the onboard experience changes. In these cases, we value solutions aimed at improving the perception of water at the points where it's actually consumed.

02

Visible particles, sediments or impurities

If small debris appears in the water, it is advisable to check the point of use and determine whether the installation needs a micron filter, a combination of filters, or a more complete adaptation.

03

Lack of confidence in drinking water on board

Even if the system works, owners, guests, or crew may prefer not to drink the yacht's water. A well-installed solution helps improve that confidence in the galley and at everyday drinking points.

04

Need for a more practical kitchen

Some boats require direct access to filtered, cold, hot, or sparkling water from the sink. In these cases, the value lies in integrating the system without compromising space, organization, or ease of use.

05

outdated or dysfunctional facilities

Sometimes the problem isn't the water itself, but how the installation is set up. Checking the layout, connections, and available space helps avoid makeshift solutions.

06

Constant dependence on bottled water

When there's no convenient alternative on board, bottles become part of daily operations. A well-chosen system can reduce that dependence and make water use on the yacht more practical.

Tailor-made solution

Why this facility needs a marine specialist

Installing water filters or Quooker-type systems on a yacht is not the same as doing so in a house. Factors that influence the installation include available space, existing connections, maintenance access, and how water is used on board.

It's not just about assembling a team, but about adapting it to the yacht.

On a vessel, each installation must fit with the existing system, furnishings, hydraulic lines, and the logic of use of the kitchen or point of consumption.

The difference lies in understanding the nautical environment. This helps avoid forced solutions, awkward access, or setups that seem correct at first but don't work well over time.

Contact a technician

A good nautical installation provides more than just filtered water. It also improves system organization, facilitates daily use, and reduces the risk of subsequent adjustments or corrections.

01

Small spaces and limited access

On many yachts, the space under the sink or in technical areas requires careful consideration of the system's location, routing, and access for future maintenance.

02

Connection with existing systems

The new solution must coexist with the yacht's existing hydraulic system, respecting connections, pressures, routing, and real possibilities for adaptation.

03

Clean and functional finish on board

It's not enough for the equipment to simply work. How it's installed, how it's accessed, and whether the solution is practical in the kitchen, sink, or other points of use on the yacht are also important.

04

Avoid generic or homemade solutions

What works in a home doesn't always work on board. A yacht has movement, its own technical spaces, different conditions, and a more demanding use.

05

More value for owners, captains, and management personnel

When the solution is well planned, it improves functionality, reliability, and operational peace of mind, especially on vessels with high demands.

Coverage in Mallorca and other ports

Installation of water filters and systems for yachts in Mallorca

We installed water filters, purification systems and Quooker-type solutions Directly in port or on board. We work from Palma and adapt to the location, schedule and operations of each vessel.

STP Palma

Technical interventions during refit, maintenance or scheduled work within the professional environment of the shipyard.

Puerto Portals

Installation of drinking water solutions on moored vessels, with a focus on functionality and daily comfort.

Port Adriano

Yacht work that requires premium solutions, good execution and adaptation to small technical spaces.

Sea Club

Technical service for water filters and Quooker-type systems on boats that need a clean and reliable installation.

Other ports in Mallorca

We travel to different marinas on the island depending on the location of the yacht and the specific needs of each intervention.

Other ports outside of Mallorca

We value travel for scheduled projects when the type of installation, technical scope and planning justify it.

We work with captains, owners and yacht management managers They are looking for a reputable company to install onboard drinking water solutions, with technical expertise, operational flexibility, and the ability to relocate when the service warrants it.

Do you need installation or advice?

Request assistance

Contact for water filters and systems for yachts

Tell us what type of solution you need for drinking water on board and we will respond as quickly as possible to assess the installation.

Quick response

We handle requests quickly to help you define the best Quooker filtration, purification, or system solution without unnecessary delays.

📍

Service at key ports

We work in STP Palma, the main marinas of Mallorca, and we consider travel to other ports when the project requires it.

🔧

Specialized technical installation

We offer professional installation of water filters, purification systems and Quooker-type solutions adapted to the nautical environment and the actual use of the yacht.

Contact phone number +34 658 835 956
Opening hours

Monday to Friday from 8:00 a.m. to 4:30 p.m.

Location: STP Palma View location on Google Maps

Contact form

Let us know if you need to install water filters or a purification solution, and we'll get back to you as soon as possible.